Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Exterior Panel Removal

Craftsman Marine — Exterior Panel Removal

A Craftsman Marine service procedure — check it applies to your exact model before use.

Browse Craftsman Marine generators & specs →

Procedure

  1. Raise the cooking compartment door.
  2. Remove screws (7) in lower front panel (11) and timer knob.
  3. Slide lower front panel (11) down from cylinder and lift off.
  4. To gain access to terminal block (for primary power), remove screws (1) securing terminal box cover to side panel.

Tools required

  • screwdriver

Source: manual:MAR-SB-ST-E_spm.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.