Craftsman Marine — Door Seal Tension Adjustment
Adjustments · Door anchor and fulcrum assembly
From a Craftsman Marine owner's manual — check it applies to your exact model before use.
Browse Craftsman Marine generators & specs →
Procedure
- Loosen the 1/4-20 jam nut.
- Turn the socket head adjustment screw counterclockwise with an allen wrench to increase sealing tension.
- For excessive latching tension after gasket replacement, adjust clockwise.
- Hold the cap screw with an allen wrench while tightening the 1/4-20 jam nut to set final position.
Tools required
- allen wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 1/4-20 jam nut
Source: Craftsman Marine owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.