Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Mounting Inspection and Fastener Verification

Craftsman Marine B.V. — Engine Mounting Inspection and Fastener Verification

For these Craftsman Marine B.V. models: CM4.65, CM4.80.

Browse Craftsman Marine B.V. generators & specs →

Procedure

  1. Use a suitable tool to make sure that the bolts on the engine bed and the nuts on the spindle are securely tightened.
  2. Check that the rubber element does not show any fissures. If it does, the engine mounting must be replaced.
  3. Inspect all hoses of the cooling system and of the fuel system.
  4. Check for loose connections or cracks and fissures in the rubber hoses. In such case the hose must be replaced.
  5. Make sure that all bolts, nuts and screws are well tightened.
  6. Make sure as well that the damper element is still sufficiently flexible. If not so, the engine must be realigned.

Source: manual:CM465_CM480_manual_web_EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.