Home›Repair guides›Coleman Powermate›Starting the engine

Coleman Powermate — Starting the engine

Operation

From a Coleman Powermate owner's manual — check it applies to your exact model before use.

Before you start

  • Do not start or run the generator in an enclosed area.
  • Gasoline is very dangerous; do not fill fuel tank with engine running.

Procedure

  1. Check oil level and fuel.
  2. Disconnect all electrical loads from the unit.
  3. Open fuel shut off valve.
  4. Adjust choke as necessary.
  5. Set the engine switch to the "ON" position.
  6. Pull on the starter rope with a fast steady pull; readjust choke as engine warms.
  7. On electric start models turn key switch to "START" and release after engine starts.

Source: Coleman Powermate owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Coleman Powermate repair guides →