Chrysler — Replacing Full-Flow Oil Filter Cartridge
Maintenance
From a Chrysler operator's manual covering: IND. 30, IND. 31, IND. 32, IND. 33, IND. 908A, IND. 931. Check it applies to your exact model before use.
Before you start
- Be sure drain plug is in place before starting engine.
Procedure
- While engine is warm, remove filter drain plug and drain oil.
- Loosen shell retaining nut and lift off cover.
- Remove filter element and spring.
- Discard element.
- Wipe housing clean and install new filter element.
- Install new cover gasket and cover.
- Ensure drain plug is in place.
- Run engine five minutes and check for leaks.
- Correct oil level to compensate for oil absorbed.
Source: Chrysler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.