Chrysler — Preparation of a New Engine
Maintenance
From a Chrysler operator's manual covering: IND. 52, IND. 53, IND. 54, IND. 56. Check it applies to your exact model before use.
Before you start
- Before any type of permanent anti-freeze is added, cylinder head bolts must be tightened to 85 foot-pounds torque. Failure may result in extensive damage to the engine.
Procedure
- Make thorough visual inspection for evidence of damage or loose parts.
- Check crankcase contains correct amount of clean new SAE 10W Engine Oil.
- Fill cooling system with water or anti-freeze; use MOPAR Rust Resistor in warm weather.
- Tighten cylinder head bolts to 85 foot-pounds torque before adding permanent anti-freeze.
- Lubricate all points requiring lubrication.
- Check battery terminals tight and clean; check electrolyte.
- Check all electrical connections tight and clean; check spark plug tightness.
- See that all nuts, bolts and screws attaching parts are secure.
Specs & values
- Cylinder head bolts: 85 foot-pounds
Source: Chrysler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.