Chrysler — King Seeley Governor Adjustment
Adjustments
From a Chrysler operator's manual covering: IND. 30, IND. 31, IND. 32, IND. 33, IND. 908A, IND. 931. Check it applies to your exact model before use.
Procedure
- For higher speed, turn adjusting cap counter-clockwise.
- For lower speed, turn adjusting cap clockwise.
- One turn changes speed approximately 300 rpm.
- For sensitivity, use hollow wrench on calibrating nut and special wrench on adjusting screw.
- Turn adjusting screw clockwise one turn; turn calibrating nut clockwise about 1/8 turn while holding screw.
- Repeat until surge eliminated.
- For reaction, turn adjusting screw counter-clockwise one turn and calibrating nut counter-clockwise 1/8 turn.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- One turn changes speed approximately 300 rpm
Source: Chrysler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.