Chrysler — Economizer Adjustment
Adjustments · Liquid Propane Gas carburetor
From a Chrysler operator's manual covering: IND. 52, IND. 53, IND. 54, IND. 56. Check it applies to your exact model before use.
Procedure
- With engine running at 1400 rpm after power adjustment, turn out economizer screw gradually until engine reaches peak rpm and begins to lose speed.
- Turn screw back in until peak rpm is reached, and tighten locknut.
- Fuel analyzer will read between 13.8 and 14.4 with this adjustment.
Tools required
- fuel analyzer Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Fuel analyzer reading 13.8 to 14.4
Source: Chrysler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.