Chrysler 2.8 Some Hoof Models — To refill the converter unit, re-install the two drain plugs and the oil
For the Chrysler 2.8 Some Hoof Models.
Browse Chrysler 2.8 generators & specs →
Procedure
- 1. Check level of oil in crankcase and add oil if necessary to bring
- 2. Check cooling system and add clean water or anti-freeze as
- 3. If the engine is operated under extremely dusty conditions, check
Specs & torque values
- This will allow the fluid ‘to fill the torque converter. With the engine run~-
Source: manual:CHRYSLER Operating Manual V8 52 53 54 56 56A .pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.