Chicago Pneumatic — Compressed Air Filter Element Cleaning

A Chicago Pneumatic service procedure — check it applies to your exact model before use.

Browse Chicago Pneumatic generators & specs →

Procedure

1. Clean plastic lens (45) with warm water only.
2. Clean other parts with warm water and soap.
3. Rinse and dry parts.
4. Blow out internal passages in body (13) with clean, dry compressed air.
5. Blow air through filter element (50) from inside to outside to remove surface contaminants.
6. Inspect parts.
7. Replace those found to be damaged.

Source: manual:8940169127.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.