Chicago Pneumatic — Cleaning
Maintenance · Filter
From a Chicago Pneumatic service manual — check it applies to your exact model before use.
Before you start
- Clean plastic lens (45) with warm water only.
Procedure
- Clean plastic lens (45) with warm water only. Clean other parts with warm water and soap.
- Rinse and dry parts. Blow out internal passages in body (13) with clean, dry compressed air. Blow air through filter element (50) from inside to outside to remove surface contaminants.
- Inspect parts. Replace those found to be damaged.
Tools required
- clean, dry compressed air Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Chicago Pneumatic service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.