Champion 100304 — Resetting the Maintenance Hour Meter
Maintenance · aXis Controller
For the Champion 100304, from the Champion operator's manual.
Procedure
- Locate the aXis Controller.
- Press OFF to take the generator off standby and enter setting mode.
- Press and hold the mode button for five seconds to enter setting mode.
- Cycle through until reaching maintenance hours (H).
- Press and hold AUTO for approximately 5 seconds until hour meter resets to 100; release button.
- Press OFF to exit, then press AUTO once to return to standby mode.
Source: Champion operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.