Champion 100199 — Storage Preparation
Maintenance · Generator
For the Champion 100199, from the Champion owner's manual.
Procedure
- Manually start engine, run several minutes to warm up
- With engine running, turn fuel shutoff valve closed, let engine run until shuts down
- Turn engine control module and ATS control module switch to OFF
- Switch main circuit breaker to OFF
- Turn off utility power to transfer switch
- Disconnect battery cables, negative cable first
- Change engine oil
- Remove spark plug, spray fogging oil into hole, reinstall
- Wash and wax exterior, do not use pressure washer
Tools required
- Fogging oil Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Champion owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.