Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Caterpillar›Soft Foot Test

Caterpillar — Soft Foot Test

Adjustments · Mounting feet

From a Caterpillar service manual covering: G3600, G3606, G3608, G3612, G3616. Check it applies to your exact model before use.

Applies to: Caterpillar G3606, Caterpillar G3608, Caterpillar G3612, Caterpillar G3616, Caterpillar G3606 engine, Caterpillar G3608 engine, Caterpillar G3612 engine, Caterpillar G3616 engine

Before you start

  • Do not use partial shims.

Procedure

  1. Place dial indicator support on base and tip against upper flat section of engine foot.
  2. Ensure all jack-up bolts are raised.
  3. Loosen engine foot while observing dial indicator.
  4. Measured deflection must not exceed 0.0762 mm (0.003 in).
  5. Add shims if necessary; repeat for all feet.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Max deflection 0.0762 mm (0.003 in)

Full service-parts list: Caterpillar G3608 →

Source: Caterpillar service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →