Caterpillar — Setpoint Viewing and Programming

Operation · PRCM

From a Caterpillar service manual — check it applies to your exact model before use.

Browse Caterpillar generators & specs →

Procedure

1. Use UP and DOWN buttons to scroll through the list of setpoints.
2. Press ENTER to program a setpoint; enter the password.
3. Use UP and DOWN buttons to obtain the desired setpoint.
4. Press the LEFT and RIGHT button; the setpoint value flashes.
5. Use UP and DOWN buttons to change the value of the setpoint.
6. Press the LEFT and RIGHT button; all characters flash.
7. Press LEFT/RIGHT to reject changes or SELECT to accept them.
8. Press ENTER to leave programming mode and return to viewing setpoints.

Source: Caterpillar service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →