Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Refer to Special Publication, NENG2500, "Dealer Service Tool

Caterpillar — Refer to Special Publication, NENG2500, "Dealer Service Tool

A Caterpillar service procedure — check it applies to your exact model before use.

Browse Caterpillar generators & specs →

Procedure

  1. 1. Thoroughly clean the outer surfaces of the turbocharger (1).
  2. 2. Loosen the hose clamps and remove the air inlet hose at the turbocharger compressor
  3. 3. Remove the exhaust pipe from the turbocharger outlet or remove the exhaust pipe from the
  4. 4. Remove the setscrews (5) from the exhaust elbow (3), if equipped.
  5. 5. Remove the setscrews (6) and remove the bracket (4) from the cylinder block.
  6. 6. If equipped, remove the exhaust elbow (3) from the exhaust adapter (1).
  7. 7. Remove the nuts (2) and remove the exhaust adapter (1) from the turbocharger.
  8. 8. Place a suitable container below the turbocharger (1) in order to collect any spillage of oil.

Source: manual:SM-Caterpillar-Cat-3054C-INDUSTRIAL-ENGINE-33400001.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.