Caterpillar — Machine Shut Down

Operation

From a Caterpillar operator's manual — check it applies to your exact model before use.

Browse Caterpillar generators & specs →

Procedure

1. Park the machine on smooth level area.
2. Set parking brake.
3. Lower all hydraulic implements.
4. Run engine at low idle for 5 minutes to allow engine to cool.
5. Turn key start switch to OFF and remove key.
6. Dismount machine using 3-point contact.
7. Block wheels and remove disconnect switch key if parking for extended period (pre OMM).
8. Drain water from air tank, if equipped.
9. Conduct post-operation walk-around inspection.

Source: Caterpillar operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →