Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Caterpillar›Spark Arrestor - Inspect/Clean/Replace

Caterpillar INV2000 — Spark Arrestor - Inspect/Clean/Replace

Maintenance · Muffler/spark arrestor

For the Caterpillar INV2000, from the Caterpillar owner's manual.

Applies to: Caterpillar INV2000

Before you start

  • Hot surface; do not perform until muffler has cooled

Procedure

  1. Allow muffler to cool.
  2. Remove screws and spark arrestor.
  3. Clean with soft wire brush; replace if damaged.
  4. Align mounting holes and reinstall with screws.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →