Caterpillar INV2000 — Recoil Start

Operation · Engine

For the Caterpillar INV2000, from the Caterpillar owner's manual.

Applies to: Caterpillar INV2000

Procedure

1. Isolate generator from utility.
2. Unplug electrical devices from receptacles.
3. Turn Engine Smart Control Switch off.
4. Open vacuum relief valve on fuel cap by rotating clockwise to on.
5. Turn generator switch to choke position.
6. Pull starter handle until resistance felt, then pull quickly; repeat if needed.
7. After starting, turn generator switch to on position.

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →