Caterpillar INV2000 — Engine Oil Level – Check
Maintenance
For the Caterpillar INV2000, from the Caterpillar owner's manual.
Applies to: Caterpillar INV2000
Before you start
- Non-detergent and 2-stroke oils will damage the engine
Procedure
- Open right service door, remove oil level gauge, wipe clean.
- Re-insert gauge without screwing in to check level.
- If low, add recommended oil via funnel to upper mark.
- Install and tighten gauge, close service door.
Tools required
- funnel Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- See viscosity chart for ambient temperature
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.