Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Hydraulic Rewind Operation

Caterpillar — Hydraulic Rewind Operation

A Caterpillar service procedure — check it applies to your exact model before use.

Browse Caterpillar generators & specs →

Before you start

  • HYDRAULIC MOTOR MUST BE IN FULLY LOCKED POSITION AS FAILURE TO DO THIS WILL CAUSE SEVERE MOTOR DAMAGE AND POSSIBLE INJURY.

Procedure

  1. Place the motor into fully locked position.
  2. Connect hydraulic hoses from the power supply to the quick disconnects provided.
  3. Use the directional valve on the power supply to regulate the pull in or pay out.
  4. After the pull back is completed, return the motor back to the free position.

Source: manual:4934_T30-36-BWRC-Operators-Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.