Home›Repair guides›Caterpillar›Engine Air Cleaner Element (Single Element) - Replace

Caterpillar — Engine Air Cleaner Element (Single Element) - Replace

Maintenance

From a Caterpillar owner's manual covering: C3.3, C3.3 Rental Generator Set, C4.4, C4.4 Rental Generator Set, D4D1-Up, GLE1-Up, N3X1-UP, N4R1-Up, N4X1-Up, X3B1-UP, XYC1-Up, XYD1-Up. Check it applies to your exact model before use.

Applies to: Caterpillar C3.3, Caterpillar C4.4

Before you start

  • Never run the engine without an air cleaner element installed
  • Never service the air cleaner element with the engine running
  • Do not use air cleaner elements with damaged pleats, gaskets or seals

Parts for this job

Part numbers from the service-parts lists for Caterpillar C3.3, Caterpillar C4.4. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Unfasten latches (1). Remove cover (2).
  2. Remove air cleaner element (3).
  3. Inspect replacement element for damage, dirt and debris.
  4. Install a clean, undamaged air filter element (3); ensure proper seating in housing.
  5. Install cover (2). Fasten latches (1).

Full service-parts list: Caterpillar C3.3 →, Caterpillar C4.4 →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →