Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›NOTICE

Caterpillar — NOTICE

A Caterpillar service procedure — check it applies to your exact model before use.

Browse Caterpillar generators & specs →

Procedure

  1. 1. Support the engine with a suitable lifting device or support the engine on blocks that are
  2. positioned on a flat level surface.
  3. 2. Install tool (A) and a suitable lifting device to the flywheel housing. Support the weight of
  4. the housing (2).
  5. Illustration 3
  6. g01123577
  7. Typical example
  8. 3. Remove the setscrews (1) that fasten the flywheel housing (2) to the cylinder block.

Tools required

  • 2. Install tool (A) and a suitable lifting device to the flywheel housing. Support the weight of

Source: manual:216-Skid-Steer-Loader-Service-Manual-4NZ03400.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.