Caterpillar C9 Industrial Engine REH — Engine Oil Pump - Remove
Repair & overhaul
For the Caterpillar C9 Industrial Engine REH, from the Caterpillar service manual.
Browse Caterpillar generators & specs →
Before you start
- Keep all parts clean from contaminants.
- Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair.
- Dispose of all fluids according to local regulations and mandates.
Procedure
- Remove the engine oil pan.
- Remove bolts (4).
- Remove bolt (3).
- Remove bolts (2) and remove engine oil pump (1).
- Remove the O-ring seal that is located between the cylinder block and the outlet elbow.
- Remove bolts (7) and remove outlet elbow (8).
- Remove bolts (5).
- Remove oil pickup tube (6) and the gasket.
Tools required
- 1P-0510 Driver Gp Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Caterpillar service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.