Caterpillar C1.7 / C2.2 — Stopping the Engine
Operation
For the Caterpillar C1.7 / C2.2, from the Caterpillar owner's manual.
Applies to: Caterpillar C2.2
Before you start
- Stopping the engine immediately after it has been working under load can result in overheating and accelerated wear.
Procedure
- Remove the load from the engine and reduce the engine speed to low idle.
- Allow the engine to idle for 5 minutes to cool the engine.
- Turn the ignition keyswitch to the OFF position.
Full service-parts list: Caterpillar C2.2 →
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.