Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Adjustment

Caterpillar — Adjustment

For these Caterpillar models: BRK1-Up, CAL1-Up, CMC1-Up, CNB1-Up, FDN1-Up.

Applies to: Caterpillar Brk1 Up, Caterpillar Cal1 Up, Caterpillar Cmc1 Up, Caterpillar Cnb1 Up, Caterpillar Fdn1 Up

Procedure

  1. From the “MAIN MENU”, press the Scroll Up
  2. From the “MAIN MENU”, press the Scroll Up
  3. Press the Enter Key (14 ) in order to select
  4. Press the Scroll Down Key (15) in order to
  5. Press the Enter Key (14) in order to select
  6. With the currently programmed time shown inside
  7. Press Enter Key (14) and the 6 digit time will be
  8. Use the Scroll Right Key (13) or the Scroll Left
  9. Press the Scroll Up Key (11) or the Scroll Down
  10. Continue until the correct time has been entered.
  11. Press the Escape Key (12) once. “SET
  12. Press the Scroll Right Key (13) in order to
  13. Press the Enter Key (14) in order to select the
  14. Use the Scroll Right Key (13) or Scroll Left
  15. Press the Scroll Up Key (11) or Scroll Down
  16. Continue until the correct date has been entered.
  17. Press the Escape Key (12) three times to return

Source: manual:EMCP3 SOTA RENR7902-00.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.