Home›Repair guides›Caterpillar›Battery - Replace

Caterpillar 3412C — Battery - Replace

Maintenance · Battery and battery cables

For the Caterpillar 3412C, from the Caterpillar owner's manual.

Applies to: Caterpillar 3412C, Caterpillar 3412C engine

Before you start

  • Batteries give off combustible gases which can explode
  • Remove the battery cover before any servicing

Parts for this job

Part numbers from the service-parts lists for Caterpillar 3412C, Caterpillar 3412C engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Turn key start switch OFF; remove key and electrical loads.
  2. Turn OFF the battery charger; disconnect the charger.
  3. Disconnect NEGATIVE cable from NEGATIVE battery terminal.
  4. Disconnect POSITIVE cable from POSITIVE battery terminal.
  5. Remove the used battery.
  6. Install the new battery.
  7. Connect cable from starting motor to POSITIVE terminal.
  8. Connect cable from ground plane to NEGATIVE terminal.

Full service-parts list: Caterpillar 3412C →, Caterpillar 3412C engine →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →