Home›Repair guides›Caterpillar›Battery Electrolyte Level - Check

Caterpillar 3412C — Battery Electrolyte Level - Check

Maintenance

For the Caterpillar 3412C, from the Caterpillar owner's manual.

Applies to: Caterpillar 3412C, Caterpillar 3412C engine

Before you start

  • Lead-acid batteries contain sulfuric acid which can burn skin and clothing

Parts for this job

Part numbers from the service-parts lists for Caterpillar 3412C, Caterpillar 3412C engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove filler caps; maintain electrolyte to FULL mark.
  2. Use distilled water if water addition is necessary.
  3. Check electrolyte condition with 245-5829 Refractometer.
  4. Clean battery case with baking soda or ammonia solution.
  5. Rinse the battery case with clean water.
  6. Clean terminals and cable clamps with fine sandpaper.
  7. Coat clamps and terminals with 5N-5561 Silicone Lubricant.

Tools required

  • 245-5829 Coolant Battery Tester Refractometer Amazon
  • 5N-5561 Silicone Lubricant Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Caterpillar 3412C →, Caterpillar 3412C engine →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →