Caterpillar 3406 — Clean Batteries and Electrical Connections

Maintenance

For the Caterpillar 3406, from the Caterpillar operator's manual.

Applies to: Caterpillar 3406

Procedure

1. Loosen and remove cable clamps from all battery terminals.
2. Clean all cable clamps.
3. Clean all battery terminals.
4. Install the cable clamps on the battery terminals. Make sure they are secure.
5. Apply a light coat of grease on the battery connections.

Full service-parts list: Caterpillar 3406 →

Source: Caterpillar operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →