Caterpillar 3126B / 3126B Industrial Engine — Engine Warm-up
Operation
For the Caterpillar 3126B / 3126B Industrial Engine, from the Caterpillar owner's manual.
Applies to: Caterpillar 3126B, Caterpillar 3126B Industrial Engine engine
Before you start
- More warm-up time may be necessary when the temperature is below −18° C (0° F).
Procedure
- Run the engine at low idle for three to five minutes, or until the jacket water temperature starts to rise.
- Check all of the gauges during the warm-up period.
- Perform another walk-around inspection. Check the engine for fluid leaks and air leaks.
- Increase the rpm to the rated rpm. The engine may be operated at full rated rpm and full load when the engine oil temperature reaches 60° C (140° F).
Specs & values
- Full load when engine oil temperature reaches 60° C (140° F)
Full service-parts list: Caterpillar 3126B →, Caterpillar 3126B Industrial Engine engine →
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.