Caterpillar 3044C — Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Maintenance
For the Caterpillar 3044C, from the Caterpillar owner's manual.
Browse Caterpillar generators & specs →
Before you start
- Cooling system coolant additive contains alkali.
Procedure
- Test SCA concentration using 8T-5296 or 4C-9301 Coolant Conditioner Test Kit.
- Do not exceed 6% SCA with coolant or 8% with water.
- To add: slowly loosen filler cap, remove.
- Drain some coolant to make space.
- Add proper amount of SCA.
- Clean filler cap, inspect gaskets, replace if damaged. Install cap.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 6% SCA with coolant
- 8% SCA with water
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.