Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Disassembled Component Inspection

CASE — Disassembled Component Inspection

A CASE service procedure — check it applies to your exact model before use.

Browse CASE generators & specs →

Procedure

  1. Check all parts when the parts are disassembled
  2. Replace all parts that have wear or damage
  3. Small scoring or grooves can be removed with a hone or crocus cloth
  4. Complete a visual inspection for integrity

Tools required

  • Hone or crocus cloth

Source: manual:SM-CASE CX210 CX230 CX240 Crawler Excavator.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.