Briggsandstratton.Com — Engine Disassembly for Major Overhaul

A Briggsandstratton.Com service procedure — check it applies to your exact model before use.

Browse Briggsandstratton.Com generators & specs →

Procedure

1. Drain oil and fuel
2. Remove air cleaner, brace, and elbow
3. Remove muffler
4. Disconnect fuel line at carburetor
5. Remove fuel tank and filter
6. Remove spark plug using wrench supplied with engine
7. Remove cotter pin which holds link attached to governor arm
8. Remove screws (2) which hold carburetor to elbow and remove carburetor

Source: manual:A AP AR6-domestic.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.