Briggs & Stratton — Test 17: Check Alternator Rotor Winding Resistance: Test Stator Power Windings

For these Briggs & Stratton models: 10 kW, 8 kW.

Browse Briggs & Stratton generators & specs →

Procedure

1. 8. Press OFF on control panel and remove 15 Amp fuse.
2. 9. Remove fuses from transfer switch.
3. 10. Disconnect Wire 11 and Wire 44 from circuit breaker.
4. 11. Disconnect Wire 22 from neutral lug.
5. 12. Disconnect all wires from AVR.

Source: manual:Briggs_Air-CooledRepairManual80019677.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.