Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Test 8: Check Fuel Supply Pressure: Test 9: Check Fuel Solenoid and Thermal Fuses

Briggs & Stratton — Test 8: Check Fuel Supply Pressure: Test 9: Check Fuel Solenoid and Thermal Fuses

For these Briggs & Stratton models: 10 kW, 8 kW.

Browse Briggs & Stratton generators & specs →

Procedure

  1. 2. Close main fuel supply valve to stop the flow of fuel to the generator.
  2. 3. Locate installer supplied fuel
  3. 4. Obtain Briggs & Stratton Crankcase
  4. 5. Open main fuel supply valve to start
  5. 6. Observe manometer gauge. Is
  6. A. Yes- Move to Test 9: Check Fuel Solenoid and Thermal Fuses (step 7).
  7. B. No- Repair or replace fuel delivery system. Retest.

Source: manual:Briggs_Air-CooledRepairManual80019677.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.