HomeRepair guidesTest 10: Check Fuel Pressure Regulator

Briggs & Stratton — Test 10: Check Fuel Pressure Regulator

For these Briggs & Stratton models: 10 kW, 8 kW.

Browse Briggs & Stratton generators & specs →

Procedure

  1. 17. Install a barbed 1/8 inch NPT fitting into one of
  2. 18. See Figure B2. Disconnect Wire 14 at fuel

Source: manual:Briggs_Air-CooledRepairManual80019677.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.