Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›B. No- Repair or replace main battery wiring between starter and starter relay. Retest.

Briggs & Stratton — B. No- Repair or replace main battery wiring between starter and starter relay. Retest.

For these Briggs & Stratton models: 10 kW, 8 kW.

Browse Briggs & Stratton generators & specs →

Procedure

  1. 34. See Figure A15. Connect positive (+) meter
  2. 35. Install 15 Amp fuse in control panel.
  3. 36. Press and hold MANUAL on control panel
  4. 37. Is DC voltage on Pin 2 and Pin 3 of
  5. A. Yes- Repair or replace wire between
  6. B. No- Less than 9

Source: manual:Briggs_Air-CooledRepairManual80019677.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.