Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›A. Yes- Move to Test 10: Check Fuel Pressure Regulator (step 17).

Briggs & Stratton — A. Yes- Move to Test 10: Check Fuel Pressure Regulator (step 17).

For these Briggs & Stratton models: 10 kW, 8 kW.

Browse Briggs & Stratton generators & specs →

Procedure

  1. B. No- Low fuel pressure. Repair or replace fuel delivery system. Retest.
  2. C. No- No fuel pressure. Install new fuel solenoid. Retest.
  3. 14. Connect Wire 14 at fuel solenoid.
  4. 15. Set Digital Multimeter to read DC volts.
  5. 16. See Figure B3. Connect positive (+) meter test lead to Pin 4 (Wire 14) of Connector J3. Connect

Source: manual:Briggs_Air-CooledRepairManual80019677.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.