Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›A. Yes- Move to Test 5: Check Starter Relay Signal (step 19).

Briggs & Stratton — A. Yes- Move to Test 5: Check Starter Relay Signal (step 19).

For these Briggs & Stratton models: 10 kW, 8 kW.

Browse Briggs & Stratton generators & specs →

Procedure

  1. B. No- Move to step 9.
  2. 9. See Figure A3. Measure DC voltage from Pin 1 of Connector J3 to battery negative (-) post. Is voltage

Source: manual:Briggs_Air-CooledRepairManual80019677.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.