Briggs And Straton V-Twin OHV-Twin — TUNE-UP PROCEDURE

For the Briggs And Straton V-Twin OHV-Twin.

Browse Briggs And Straton generators & specs →

Procedure

1. 10. | Install flywheel and set air gap. Check for
2. 11. | Remove cylinder heads. Remove carbon.
3. 12. | Reinstall cylinder heads using new
4. 13. | Reinstall intake manifold using new
5. 14. | Reinstall blower housing.
6. 15. | Install new oil filter. Replace oil and fuel.
7. 16. | Adjust equipment control and cables, if
8. 17. | Service air cleaner pre-cleaner and
9. 18. | Check muffler for restrictions or damage.
10. 19. | Start engine and bring up to operating

Source: manual:Briggs-Stratton_4Cycle_V-Twin_OHV_Repair_Manual-1.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.