Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›The steps are also covered in the Overhaul Procedure and will normally be performed as a part of the complete

Briggs And Straton V-Twin OHV-Twin — The steps are also covered in the Overhaul Procedure and will normally be performed as a part of the complete

For the Briggs And Straton V-Twin OHV-Twin.

Browse Briggs And Straton generators & specs →

Procedure

  1. 10. | Install flywheel and set air gap. Check for
  2. 11. | Remove cylinder heads. Remove carbon.
  3. 12. | Reinstall cylinder heads using new
  4. 13. | Reinstall intake manifold using new
  5. 14. | Reinstall blower housing.
  6. 15. | Install new oil filter. Replace oil and fuel.
  7. 16. | Adjust equipment control and cables, if
  8. 17. | Service air cleaner pre-cleaner and
  9. 18. | Check muffler for restrictions or damage.
  10. 19. | Start engine and bring up to operating

Source: manual:Briggs-Stratton_4Cycle_V-Twin_OHV_Repair_Manual-1.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.