Briggs And Straton V-Twin OHV-Twin — Removal 0... ec ce een en ene ene e ene n ene nes 5s 3,4
For the Briggs And Straton V-Twin OHV-Twin.
Browse Briggs And Straton generators & specs →
Procedure
- 1. INTAKE STROKE
- 2. COMPRESSION STROKE
- 4. EXHAUST STROKE
- 1. INTAKE STROKE:
- 2. COMPRESSION STROKE:
- 3. POWER STROKE: 4, EXHAUST STROKE: Fig. 1 - The 4-Stroke Cycle As the piston moves down, a vacuum occurs in the cylinder. The intake valve has been opened by the intake cam lobe. Atmospheric pressure pushes the air/fuel mixture through the open intake valve into the cylinder above the piston. At the bottom of the stroke the intake valve closes. The exhaust valve stays closed. As the piston moves up with both valves closed, the air/fuel mixture becomes highly compressed in the space left between the top of the piston and the cylinder head. — . Just before the compression stroke ends, the magneto produces a high voltage arc across the spark plug gap igniting the air/fuel mixture. The rapidly burning mixture expands producing very high pressure, pushing the piston downward. As the piston begins to go up, the exhaust cam lobe opens the exhaust valve and the piston pushes out the burned gases. The exhaust valve closes near the top of the stroke, completing the cycle and the intake stroke begins again. IMPORTANT Fill the crankcase with proper oil before starting engine. See that oil level is maintained at the proper level. SEPTEMBER, 1993 1 GENERAL INFORMATION
- 12.
- 13. 14,
- 15.
- 16.
- 17.
- 18. IN THE INTEREST OF SAFETY THIS SAFETY ALERT SYMBOL INDICATES THAT THIS MESSAGE INVOLVES PERSONAL SAFETY. SIGNAL WORDS DANGER, WARNING AND CAUTION INDICATE HAZARD DEGREE. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY.
Source: manual:Briggs-Stratton_4Cycle_V-Twin_OHV_Repair_Manual-1.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.