Basler — Stability Adjustment
Adjustments · Voltage Regulator
From a Basler service manual — check it applies to your exact model before use.
Procedure
- Adjust the screwdriver control to control the amount of feedback applied to the Sensing and Gating Circuitry.
- Normally factory preset near the extreme clockwise (CW) position.
- Rotate counterclockwise (CCW) for faster response; if oscillation occurs, rotate CW well above the point where oscillating occurred.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Basler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.