Aurora Generators ES52 — Crank and Crank Rest
Adjustments · DIP switches 1,2,3; Crank/Rest pot
For the Aurora Generators ES52, from the Aurora Generators service manual.
Browse Aurora Generators generators & specs →
Procedure
- Set DIP switches 1, 2 and 3 to ON to enter Setup Mode.
- Apply power to Auto; Over-crank LED flashes.
- Time between flashes indicates Crank and Crank Rest time.
- Adjust pot to increase or decrease Crank/Rest time.
Source: Aurora Generators service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.