Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Install Low-Pressure Fuel Line - Basic

Aurora — Install Low-Pressure Fuel Line - Basic

A Aurora service procedure — check it applies to your exact model before use.

Browse Aurora generators & specs →

Procedure

  1. Position new hose clamp onto hose
  2. Install hose onto connection
  3. Reposition the new hose clamp into the positions noted on removal
  4. Install nut onto the bolt and torque to 10 N·m (89 lb in)

Tools required

  • suitable tool

Specs & torque values

  • Torque: 10 N·m (89 lb in)

Source: manual:perkins_m0103175_disassembly_assembly.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.