Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Install Low-Pressure Fuel Line

Aurora — Install Low-Pressure Fuel Line

A Aurora service procedure — check it applies to your exact model before use.

Browse Aurora generators & specs →

Procedure

  1. Position new hose clamp onto hose
  2. Reposition hose clamp onto bolt
  3. Install nut onto the bolt and torque to 10 N·m (89 lb in)

Tools required

  • suitable tool

Specs & torque values

  • Torque: 10 N·m (89 lb in)

Source: manual:perkins_m0103175_disassembly_assembly.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.