Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Remove Fuel Injection Lines

Aurora — Remove Fuel Injection Lines

A Aurora service procedure — check it applies to your exact model before use.

Browse Aurora generators & specs →

Before you start

  • Do not let the tops of fuel injectors turn when the fuel line nuts are loosened or tightened - the fuel injectors will be damaged
  • Place identification marks on all tube assemblies for installation
  • Plug all lines and tube assemblies to prevent contamination

Procedure

  1. Turn the fuel supply to the OFF position
  2. Using Tool (A) disconnect tube nuts for fuel injection lines from fuel injectors
  3. Using Tool (A) disconnect tube nuts for fuel injection lines from fuel injection pump
  4. Remove fuel injection lines from the engine as a unit
  5. Use suitable caps to plug the open ports of the fuel injection pump immediately

Tools required

  • Injector Pipe Nut Tool (27610294)

Source: manual:perkins_m0103175_disassembly_assembly.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.