Atlas Copco — Starting (SF Skid - Tank-mounted - Twin)

Operation · compressor

From a Atlas Copco owner's manual covering: SF 1, SF 11, SF 15, SF 2, SF 4, SF 6, SF 8. Check it applies to your exact model before use.

Browse Atlas Copco generators & specs →

Procedure

1. Open air outlet valve (2-Figs. 1.2/1.4).
2. Switch on the voltage.
3. Check that the condensate drain valve underneath the air receiver (if installed) is closed.
4. Move switch (2-Fig. 1.10) to AUTO. The compressor starts running.
5. The drive motor(s) will automatically stop and start, depending on the air pressure.

Source: Atlas Copco owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Atlas Copco repair guides →