Atlas Copco — Starting (SF Multi)
Operation · compressor
From a Atlas Copco owner's manual covering: SF 1, SF 11, SF 15, SF 2, SF 4, SF 6, SF 8. Check it applies to your exact model before use.
Browse Atlas Copco generators & specs →
Procedure
- Open air outlet valve (3-Figs. 1.5/1.6).
- Switch on the voltage.
- Close condensate drain valve (1-Fig. 1.9).
- Press start button (1-Fig. 1.11). Compressor starts and automatic operation LED (8-Fig. 1.11) lights up.
- The regulator automatically stops and starts compressor modules, depending on the air pressure.
- On SF Full-Feature, the nominal pressure dewpoint will be reached after a few minutes.
Source: Atlas Copco owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.