Atlas Copco — Replacing the fuel filter element
Maintenance
From a Atlas Copco owner's manual covering: QAX 12 Dd, QAX 20 Dd, QAX 30 Dd, Qc1002. Check it applies to your exact model before use.
Applies to: Deutz F2M 2011 F engine, Deutz F3M 2011 F engine, Deutz BF3M 2011 F engine
Before you start
- Never leave spilled liquids in or around the generator
Procedure
- Unscrew the filter element from the adapter head.
- Clean the adapter head sealing surface.
- Lightly oil the gasket of the new element.
- Screw the new element onto the header until the gasket is properly seated.
- Tighten with both hands.
- Check for fuel leaks once the engine has been restarted.
Source: Atlas Copco owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.